AX14S Bridge and Trigger
AcousTech 14" Snare Bridge & Trigger Kit

Comes with installation instructions. No soldering or special tools required. This was made available primarily for those drummers out there with the original AX13 and 14S that had the trigger mounted to the bottom head. It was messy and an eyesore. With this Bridge and Trigger kit you can make your drum look like the one pictured, and get much better triggering to boot.
We have improved the replacement Triggers again by making them modular. So after you have installed this type of trigger if it fails, you will replace the failing trigger with the EZ Head Piezo repair trigger or the EZ Replacement Rim Trigger, depending on which trigger fails.

This system is also great for those DIY'ers out there that like to do their own thing. This system will work on drums up to 14", for drums larger than 14" you really need the Bass Bridge Trigger and Foam. Our Bridge mounts to your existing lug structure so you don't have to drill holes to mount the bridge.

This new foam was introduced in July of 2006 and it successfully reduces the hot spot that up till then had been an issue with some of our drummers. Pintech works diligently to hear and act upon all issues that our drummers inform us of.
This new foam also happens to make the position sensing of Pintech drums on the Roland TD12 and TD20, quote "Phenomenal" as stated by several of our drummers.

*As this will be installed by a non-trained individual there is no inherent warranty. Customers install these at their own risk. Pintech always recommends that the Pintech product be sent in for repair by a licensed professional. However, we also recognize that sometimes that just isn’t an option for our drummers. We do try to make things as simple as possible for our drummers and if you handle the triggers with the appropriate care and follow the instructions, you shouldn’t have any problems.