Bass Bridge and Trigger Kit

We had these special bridges made for the larger drums for the AcousTech conversions that we do. Of course when the drums are sent to us we custom make the triggers to suit the drum. We obviously can't do that for a generic system that can be ordered.
This system is great for those DIY'ers out there that like to do their own thing and does allow you to use your inherent inventiveness to make it work for you. The bridges are cut to the appropriate length for the drum being triggered so make sure to pick the drum size so we can make sure to send the correct size bridge.

We have improved the replacement Triggers again by making them modular. So after you have installed this type of trigger if it fails, you will replace the failing trigger with the EZ Head Piezo repair trigger or the EZ Replacement Rim Trigger, depending on which trigger fails.

This new foam was introduced in July of 2006 and it successfully reduces the hot spot that up till then had been an issue with some of our drummers. Pintech works diligently to hear and act upon all issues that our drummers inform us of.
This new foam also happens to make the position sensing of Pintech drums on the Roland TD12 and TD20, quote "Phenomenal" as stated by several of our drummers.

We include the installation instructions for the AX14s as the installation is essentially the same. We also include 1 Pad foam and 1 bass foam since we don't know whether you are using this on a bass or a larger tom.

*As this will be installed by a non-trained individual there is no inherent warranty. Customers install these at their own risk. Pintech always recommends that the Pintech product be sent in for repair by a licensed professional. However, we also recognize that sometimes that just isn’t an option for our drummers. We do try to make things as simple as possible for our drummers and if you handle the triggers with the appropriate care and follow the instructions, you shouldn’t have any problems.
**Picture shows an installed bridge